Description
Aluminum HK/SBT type stock or arm brace adapter for your CZ Scorpion Evo. Our adapter is low profile and integrates any HK MP5 type stock or brace directly to the upper receiver of the Scorpion Evo. The assembly will maintain the side folding characteristics stock/brace. Our brace mount is machined from billet 6061T6 aluminum and hard coat anodized to MIL-A-8625, the SBT braces are polymer.
Our stock adapters are machined to factory spec and are designed to press fit with the dovetail on the Evo receiver (just like the factory stocks and pistol endcaps). No set screws are used, and no upper receivers are damaged. A rubber mallet or deadblow hammer will be very helpful for the removal of the factory parts and installation of our adapter.
Note that there are small differences between the Scorpion Evo and Scorpion 3 Plus receivers. We have designed our stock and brace adapters dedicated to each receiver geometry, rather than universal. This part specifically fits the CZ Scorpion Evo 3. If you are looking for a similar stock/brace adapter for your CZ Scorpion 3 Plus please see CZ Scorpion 3 Plus SBT Folding Brace and Adapter .
Choose from the drop down menu above to order either the Adapter Only (customer supplied stock/brace) or select from two SBT brace options for a drop in ready arm brace assembly. If purchasing our adapter only and using an HK/B&T stock or and older SBT brace you *may* need to enlarge the screw bore diameter in your stock/brace. Some stocks/braces use a smaller 4mm screw, our adapter uses the larger 5mm screw.
- HK MP5 Type Stock/Brace adapter for CZ Scorpion Evo
- Side Folding with Seamless Integration into the Evo Upper Receiver
- Fits all CZ Scorpion Evo Variants (S2/Micro/Pistol/Carbine)
- Available Pre-Assembled with SBT HK or CZ Type Braces
- Drop In, No Additional Parts or Hardware Needed
- Machined Aluminum 6061-T6
- Anodized MIL-A-8625 Type 3 Hard Coat
Designed and Manufactured completely in USA.
All NFA rules apply (if using this product on a pistol).
Gunsmith Installation Recommended for All Parts.
Michael G (verified owner) –
Higher quality and better fit.
I bought HBI’s folding brace (along with a ton of other upgrades) before I actually recieved my Scorpion eEvo 3 S1, but then ended up getting a Scorpion with an original SBT folder. The original was somewhat wobbly, although not enough be actually be an issue, but just for fun, I decided to go ahead and put the HBI folder on. I am amazed at the difference…no wobble at all, the metal section makes me feel much better, and I didn’t have to use and tension screws. I highly recommend this product.
Jared W (verified owner) –
It was smaller than i expected. Which is nice. It fits the size of the gun great. Mine was Fairly wobbly at first but i tightened up the screw and now its solid as a rock. The only wobble comes from were the Folding adapter locks in which is very slight.
Reginald Hooks (verified owner) –
I just received my SBT folding brace with the HB industries adapter. I bought the collapsible one initially and I enjoyed it made my Scorpion look good and easy to deploy and I was shooting pretty good with it. At longer distances I noticed some wobble and it wasn’t very comfortable on my cheek. 1st thing, it’s incredibly easy to put on and very rigid. Resting my cheek on it is a pleasure and I able to see my Holosun 512c red dot with the circle perfectly. HB Industries has the cheapest price I could find. I’ve Bought a lot of other things from them all quality products at a good price and good delivery time. HB keep up the good work! Thank you!
dapope_22 –
The added stability of this brace will completely change the ergonomics of this firearm. It was a little tight sliding in on but a few taps with the rubber mallet took care of it. There was a little play in the brace when lock in, but a little piece of Gorilla tape between the mount and the brace took care of it. Folds up so compactly that it fits in my small back pack with ease. I love this brace!
Jasonfrater (verified owner) –
Absolutely fantastic build quality. Super tight in the receiver and absolutely no wobble. Very nice, smooth, and sturdy folder. The best part is, is that it’s built better than SBTactical’s full brace and it’s cheaper! The HB adapter is wonderfully built. Overall, would recommend and would buy again if needed!
Mark Heater (verified owner) –
At the time I ordered this, HBI only had the adapter and not the brace. I found the same SBT brace only (no adapter) for a great price somewhere else and bought the HBI adapter hoping everything would fit together correctly and work. HBI’s accurate and detailed description enabled me to purchase the adapter from them and the brace elsewhere and I couldn’t be happier. The adapter is super high quality and fits perfect! I have zero wobble in mine and couldn’t be happier.
Keep up the great work HBI!
Josh W. –
I didn’t buy this brace from HBI, but I bought it on my Scorpion and it’s amazing. Very solid and good looking product.
Nathan (verified owner) –
Absolutely satisfied with this product. HBI’s adapter fits like a glove, no wobble or rattle like what’s been reported with the original SBT adapter. It, along with other upgrades I’ve installed from HBI, has made my Scorpion a very comfortable and fun shooter.
Supremium (verified owner) –
Easy to install and super sturdy. Zero wobble or play once folded out as well as folded in.
Michael Liebel (verified owner) –
The adapter fit better than I expected. High quality and after installing the brace I already had everything was rock solid.
Rawley (verified owner) –
SBT CZ Type Brace fitted perfectly on my Scorpion 3+ Micro. Thanks
Justin Peterson (verified owner) –
Great brace fit perfect and easy install