Description
An extremely versatile thread protector for your pistol, rifle, or SBR. Available in both 9mm (1/2-28) and .45ACP (.578×28) our Micro Comp + Thread Protector is designed to be short, lightweight, and 100% functional as both a compensator and thread protector. The backbore and radial porting create “neutral bias” compensation when fired, reducing muzzle rise by as much as 20-30% (as measured with MantisX10). The deep precision cut threads and a high temp silicone o-ring hold the device securely in place through endless hot/cold cycles. The taper machined groves on the outside diameter provide tons of grip for toolless removal and installation.
If you are tired of checking your thread protector between magazines, or just looking for the most compact comp on the market, our Micro Comp has been designed and manufactured specifically for you.
Our 9mm Micro Comps measure 0.75″ outside diameter, 0.80″ long, and 1/2-28 thread is 0.63″ deep. Our .45ACP Micro Comps measure 0.818″ outside diameter, 0.85″ long, and the 0.578″x28 thread is 0.66″ deep. Both are machined from 4140 steel, heat treated, and finished in black nitride. The 9mm Micro Comp is also available in gold (TiN) finish. Weight is just 0.62 oz (for reference an A2 spec flash hider weighs 2.20 oz and a 1/2-28 3lug adapter weighs 0.75 oz). Note that some 10mm barrels also use a .578×28 thread, and our .45ACP Micro Comps are compatible with 10mm barrels in this case.
NOTE: Actual color of o-ring is subject to change based on supplier availability.
- 9mm or 45ACP Micro Comp + Thread Protector
- High Temp O-Ring Prevents Loosening
- Reduces Muzzle Rise by as much as 20-30%
- Threaded 1/2-28 for 9mm, 0.578×28 for 45ACP
- 9mm Length is 0.80″, 45ACP Length is 0.85″
- 9mm Weight is 0.62 oz, 45ACP Weight is 0.82 oz.
- Machined from 4140 Steel
- Black Nitride or Gold TiN Finish
Designed and Manufactured completely in USA. 922r Compliant.
Gunsmith Installation Recommended for All Parts.
Jack (verified owner) –
Looks amazing on my scorpion.
Brian Doyle (verified owner) –
I purchased 2. One went on my Stribog Gen2 and the other onto my Kriss Vector SDP. They stay tight and don’t back off when shooting like some comps I’ve tried.
These mini comps are fantastic and at a great price, grab a few and try them out!
Cotye Wehrle (verified owner) –
I put on my stribog and love it. Small and sleek does help mitigate muzzle rise, has stayed tight for over 400 rounds. I’ll be ordering another for my pistol
Derek Wride (verified owner) –
Seriously cool product. Looks great, and can still holster without any fuss.
Rustin Osborn (verified owner) –
I bought this comp for my StriBog gen 2. Awesome little comp. My only critique would be that it’s extremely tight. I was afraid I had the wrong thread pitch but just have to continue twisting.
saico (verified owner) –
Too bad they’re out now. I have 4 and they’re great. About half price of what others are charging for a mini comp
Johnny Salaza (verified owner) –
Awesome design at a great price! My only regret I only ordered two and now they are out if stock…
Robert Bonalba (verified owner) –
I just received mine, it looks good on my Ruger PC Carbine 9mm. Can’t wait to try it out.
fattimotorworks (verified owner) –
Great product at such a great value.
David Sanders (verified owner) –
Best micro comp- ever. Threw this on my vector gen 2. Looks amazing. Tried it on my POF- 5 mp5 and fit perfect and looked great.
Parker –
Shipped next day after ordering and fits nicely on my stribog.
JohnDy (verified owner) –
Love this, great product for a tremendous price! Everything I have purchased from HBI has been top shelf, thanks!!
Matthew Johnson (verified owner) –
Exactly what I was looking for. Does what it’s supposed to do as a compensator, while looking good plus, a nice finish. Also keeping it purpose built, small & simple, which is just perfect for my compact PDW, a RUGER PC Charger.
More importantly I can take it off quickly to suppress & put it back on as a really nice thread protector. Good Job!!
Bryton (verified owner) –
I bought this product recently. It does provide a lower profile to the barrel. I am extremely pleased with the way this turned out. The shipping was extremely fast. I would recommend.
David Yount –
I ordered one for my scorpion with HB I three-lug k kit on it….works and looks amazing like it came from factory. I ordered two more of them….one for freedom ordinance fx-9 pistol, and one for keltec sub 2000. Had to use a crush washer to fill the gap on fx9 pistol….looks great.
Joshua Bell (verified owner) –
A+ product, fast and cheap shipping. Looks and functions great on my Sig P365XL
Edgar Berganza (verified owner) –
Awesome little piece! Looks great on my P10C and STAYS on! Can’t wait to take some shots!
Jeff Wrede (verified owner) –
I own the Canik TP9 Combat Elite Executive and having to use a wrench every time to remove and reattach the thread protector is a pain. When I saw this Thread Protector from HB Industries, I immediately loved the look, and when I discovered you can take it off and put it on without a wrench, I was sold and ordered one. Now that I have it, it’s fabulous! Excellent quality! Highly recommend!
Nathaniel Levi Watson (verified owner) –
Great comp for the money although I made it better with modifications, I removed the lip holding the rubber ring in and replaced the ring with a thinner one now the comp threads deep enough it covers the barrel slightly leaving only the port holes sticking past the end of the muzzle threads. Giving an overall shorter length on the end of my p10c but still seats solid and doesn’t back off.
Thomas Smith (verified owner) –
A very good compensator for my Scorpion SBR. the front hand stop shows blackening from powder, My hand usually shows a u shaped white spot in black after a field day. It helps recoil though and keeps you on target through fast strings. My suppressor has more recoil.
Jason (verified owner) –
These are awesome. I just bought a 3rd
Nate –
**Important Personal Install Notes & Reivew** I had an interesting experience with this compensator. I purchased it to put on my Scorpion Evo 3 S1. However, when it arrived, and I took the stock compensator (1) and barrel thread protector, I realized that with the stock compensator catch (Part 89 on the exploded view) wrapped around the barrel nut (2) left on and in the original position, the microcomp looked goofy because of the exposed threads that the stock compensator used to thread onto the barrel. Clearly this wasn’t right, so I put the Micro Comp aside to figure out another day.
Fast forward a few months, and I was disassembling my Scorpion to do a deep clean, remove built up carbon, etc. Ultimately this included taking off the HB Aluminum handguard, which revealed the barrel…. and also gave me reason (and leverage) to *remove the barrel nut and the compensator catch*, which required a significant amount of torque. I ended up taking it completely off, as it was clear that it and the corresponding barrel threads had a ton of loc-tite on them. After cleaning everything first with an ultrasonic soak in 50% strength Simple Green Aircraft then a stainless steel wire brush on the inside of the barrel nut to remove the loctitc, I took off the awkward looking stock compensator catch and began reassembling… I reapplied loctite to the outermost threads for the barrel nut, and threaded it on so that *no large threads could be seen*. At that point, I screwed on the Micro Comp until it hit the barrel nut, and…. Mission Accomplished!! That little sucker works great, looks smaller and more modern than the stock compensator, and the O-ring holds it in place. Form and a functional upgrade by not having to worry about the thread protector loosening, all for 20 bucks. I highly recommend them.
Terry Blansett (verified owner) –
Got it on my Canik TP9SA and love it. Shared on Canik Nation so you’ll be getting some orders soon from those guys.
Greg Young (verified owner) –
Most Excellent! Made an immediate difference! Did my homework and the 9mm Mini Comp from HBI is a real value and design. Many Thanks to you HBI.
Tyler Frizzell (verified owner) –
The Future is now. That’s what I’m coming to realize with shooting. In order to continue evolving as a shooter, we must be able to adapt to new equipment. I bought the MicroComp more as a thread protector first, compensator second. A friend recommended it, and at $20 I figured why not. I am using it on a Gen 1 S&W 4.25 M&P 9MM. I am using a Storm Lake barrel. It reduces felt recoil noticeably and makes follow up shots a breeze. It does not seem to induce malfunctions and I’ve shot 115, and 124 grain ball and some defensive ammunition. Good To Go. Fits holsters I already have with no modification. Will recommend and will buy again.
Salvatore R. (verified owner) –
I went to the range with it on my Scor-Bog and left with it on my P365. It made a noticeable difference on my p365. Awesome upgrade for under 30 bucks.
Joe Kump (verified owner) –
Received this micro comp last week for my CZ P07. Easy to install and the handgun shoots great. Would Highly recommend.
Matt –
Great muzzle device, exact diameter of the Stribog barrel.
Chris S (verified owner) –
Get one for every 9mm in the house and consider it a fancy thread protector. Very handsome craftsmanship. Fit is fantastic and it’s barely noticeable. For those owners that like to keep it stock this Micro Comp retains the same profile as the standard stock thread protector. Shipping was fast!
Jake (verified owner) –
Looks tits on my glock build
Vitalii Lupasco (verified owner) –
Very nice! Fits the gun perfectly and the price is very affordable! Love it
Carlos (verified owner) –
Ive got it on my Sig P365 XL. The Gold TiN matches my TP Gold Barrel perfectly! Customer service is second to NONE! Could not be happier.
Terrence26 –
Great company, great communication you cannot go wrong with these guys.
Jonas (verified owner) –
I lost a thread protector for my Canik Mete SFT so I ordered this (and a second one for another pistol) as a replacement. They worked so well I just ordered 2 more for other pistols. Highly recommended if you’re tired of worrying about your thread protector coming loose and want some functional benefits at the same time.
Brad I. (verified owner) –
Very effective for such a little comp. The big plus, which is why I bought it, was to keep my Bog as compact as possible, for fitting into my EDC bag. It saves close to an inch in length.
James Bond (verified owner) –
Top quality product.
mazdog92 (verified owner) –
These are awesome. Just got the 2 I ordered and just placed order for another and a rifle comp. Glad I caught these on the sale price. LOL
Thanks for great products
George Garza (verified owner) –
I bought one in October of last year in TiN for my PSA Dagger w/Faxon TiN barrel. I had problems with failures to feed which tells me the comp really works. I put a lighter recoil spring in and it has been working ever since. This is a more economical and better looking compensator than the Griffon Carry Comp.
Anthony Costanzo (verified owner) –
Ordered the Micro Comp on the 27th and it was in my mailbox the 28th. Amazing product and amazing customer service
stinky (verified owner) –
Oh yeah ! this mini comp is awesome no baloney the real deal, slipped on my FNX 45 TAC and looks good , most important works good. the only thing is i wish i had thought of this brilliant concept. This product gets 5 stars for a reason Quality .
Dennis Wimberley (verified owner) –
Looks great, shoots great. Easy install. Love it will buy again and tell my friends.
Joe Lewchuk (verified owner) –
I put one of these on my Kriss Vector .. omg looks great and works even better !!!
emar@truby.us (verified owner) –
Slightly reduces recoil on my P-07, I’m very happy with this micro comp. You’ll never have to worry about it backing off the host.