Description
The Theta Forward trigger for the CZ Scorpion EVO 3 and 3+ is a flat faced trigger with a +5mm forward position that provides increased leverage over the factory trigger. The increased leverage will reduce the trigger pull weight by about 12%*. When compared to a curved trigger, the flat surface profile on our Theta triggers provides a more tactile and consistent trigger pull regardless of where the operator places their finger. The increased repeatability in pull force and trigger movement makes every shot feel just like the last, allowing for quicker and more accurate follow up shots. The Theta triggers are precision machined from billet aluminum available in black or red. Made in the USA, this part counts towards 922R compliance. Trigger includes a new roll pin for seamless installation.
- Theta Forward Flat Faced Trigger
- Increased Leveraged, Reduced Pull Weight
- Available for both the Factory Sear and CZ Custom Trigger Pack
- Fits all CZ Scorpion EVO 3 and 3+ Pistol and Carbine Models
- Made in USA, 922R compliant
- Drop In Replacement, Includes Roll Pin
- Machined Aluminum 6061-T6
- Available in Black or Red
*Please note: This 12% trigger pull force reduction comes at a cost. The +5mm forward face position provides a noticeable increase in leverage about the trigger mechanism pivot, especially with the factory 10lb+ trigger spring. However, placing the face of the trigger forward of the factory trigger does increase the length of pull (LOP) by +5mm, and does very slightly increase the travel of the trigger itself by about 1mm. These trade-offs will not impact most shooters, but should be known.
Gunsmith Installation Recommended for All Parts.
Dave Owensby (verified owner) –
Trigger feels great when used with the spring kit, really cool in red matched with the charging handle. The products are of very good quality and the customer service is awesome….
Brett (verified owner) –
I have ordered parts from several companies before, hb is by far the best, great customer service, fast shipping and the parts are high quality
daniel –
I purchase trigger as well as safety delete, both work great, easy install, I was well pleased
justinjcasey –
Literally just finished installing my trigger shoe, and spring kit. Awesome part quality, and fast shipping too. I really loved the install videos. Great company to do business with!
Scott (verified owner) –
So far I’ve added the theta trigger, spring kit, charging handle, and safety delete. All shipped fast , were easy to install and were high quality. Cracked my stock mag release and just ordered the duckbill … Can’t wait
Chris (verified owner) –
Fit and finish is top notch!
Definite improvement over stock.
The flat face does make it feel easier to shoot faster.
Hats off to HBI, excellent product!
John Grimes (verified owner) –
Well made product. Easy install and looks good too. I have large hands so the extra reach is a plus.
Thanks
That one guy –
Worked like a charm and what a difference in trigger pull and a much better looking CZ with the red trigger and charging handle!
I did find that if you put the trigger return bar in the sear first just barely and the pin through it to hold it you can press the spring down and push it over and it’s already held together instead of jumbling with the thumb trick.
Hope that made sense.
Great products!
mrstefanko1 (verified owner) –
Amazing fit and function
Mario –
This trigger not only looks great but when combined with the reduced weight trigger spring it makes a huge difference in this platform. Well done guys.
Kenneth R Noe (verified owner) –
Great quality. Looks and feels great. Definitely a worthwhile upgrade. Paired with the lightweight trigger spring made a night and day difference.
texasvoodu (verified owner) –
BAD ASS Trigger !!!!! Great feel and smoother operation. Another quality product from the folks at HBI
Budshad@gmail.com –
Just installed the extended slide and spring kit with trigger shoe and it shoots like a different gun now. Really happy with the quality and looks of the gun. Nice looking before. Beautiful now. Great install videos to help you along the way. Can’t go wrong with HB Industries. A++++
justin (verified owner) –
love it!
MAC (verified owner) –
Such a great upgrade. Trigger along with spring kit is a drastic difference from stock. I wish they had black at the time of ordering. But I can get used to the red I suppose. Either way- awesome product
Castle888 (verified owner) –
My first flat trigger, install is tight and secure. The red adds a nice flare to it. I paired w trigger spring kit and a polish job, I’m getting consistent 5lb trigger pulls now. Can’t wait to hit the range.
emckenney (verified owner) –
I have fairly large hands and long fingers, so the factory trigger shoe really cramped my trigger finger to push straight rearward. The Forward set trigger shoe moves the trigger face forward enough that I can get a much better trigger press. Side benefit is that it makes the trigger reset feel like it is much shorter. Very high quality part and a 5 minute installation job. Money well spent. Also had the part in my hands AZ to OH in just about 24 hours.
Chris (verified owner) –
This paired with the spring kit and you have the feel of a nicely tuned mil spec AR trigger. These two upgrades are worth twice the price easily. You will understand when you make the switch. Installation from start to finish was under 10 minutes. Follow the video and it’ll be a breeze!!
Gene Fenske –
First let me say GREAT CUSTOMER SERVICE!! I bought a number of HB Industry items for my Scorpion Evo Micro the Theta trigger being one of them. I was afraid with my smallish hand the finger reach may have been a bit far but not at all. It’s great. Between this and the spring kit great change! Did it myself but may not be easy for everyone. Following a video will help. Took about 20 minutes.
kulewa6 (verified owner) –
This, along with the safety delete and Theta Forward Trigger are outstanding improvements to an already fine weapon. I did the work myself after carefully watching the videos
Thanks
Stan Lindholm (verified owner) –
What a huge improvement over the stock trigger! I had a very difficult time getting the screw out that holds the trigger pack in. (They use a lot of loctite at the factory.) Before I stripped the screw, I took it to a gunsmith that works on Scorpions a lot. He had it out in a jiffy. After that, installation was fairly straight forward. Getting the trigger return bar, sear and spring back together was a little bit challenging. Other than that it was not hard at all. The video helped a lot. Took it to the range, and WOW! What a difference! Get you one! You won’t regret it! But get help with that trigger screw if you’re having trouble!
Jeffrey Campbell (verified owner) –
Great company love this new trigger with the reduced weight trigger spring. I have a lot of HBI accessories on my CZ evo carbine.
Andrew Catanese (verified owner) –
Another knockout for HBI with this one. The flat face is just a great feel when compared to the factory curve. Machining quality is excellent as is all of HBI’s products which have yet to disappoint. Highly recommend pairing this with the trigger spring kit by HBI to maximize the benefits of this trigger.
Adam S. (verified owner) –
High quality product. Fit and finish are superb. Install takes only a few minutes. Used in conjunction with their reduced weight trigger spring kit, a safety delete, and a pakse pathfinder grip, it turned my Micro into the perfect pdw. So perfect I sold my Sig Mpx. Both of them! Cheers to the guys and gals at HB ind!
dapope_22 (verified owner) –
Installed this along with the trigger spring kit and was amazed. It took a seriously bad trigger and turned it into a pretty awesome trigger! It feels like the pull weight was cut in ½. A definite must for the CZ Scorpion.
Dkerchner (verified owner) –
Easy install. Fits great. Looks great.
Josh W. (verified owner) –
Looks and feels amazing
BC-Fort Worth (verified owner) –
After discussion with Mike B, I decided to go with the Theta forward over the stock trigger. Machining quality is excellent. Highly recommend pairing this Theta Forward Trigger along with the trigger spring kit. Dropped the pull weight from 10.8 to 4.4 – 4.6 pounds. Excellent upgrade. The installation was a bit of a challenge and the video was helpful. Great service and product.
Ateaney (verified owner) –
Love this trigger shoe. There’s not much on this website I haven’t ordered for my scorpion. I love how HB Industries pays attention to fine detail. The trigger is counter sunk on both sides. This makes getting the roll pin started an absolute breeze. Looks and feels awesome!!
lmckelvy (verified owner) –
Love this Theta Forward show. Matched with a HBI spring kit I don’t think it could get much better than this with simple parts changes. Well worth the money.
Derek –
I purchased a CZ Scorpion EVO 3 S2 that had the Red Theta Forward trigger and it’s a perfect option for this gun. I compared to a friends stock Scorpion and the HBI trigger is head over heals better.
Andrew Marsh –
A great simple mod for your Scorpion. Love the feel and took less than five minutes to put on.
Joe R –
What can i say except that i love HB industries. This trigger is a great upgrade to my scorpion. Went well with the lightened spring kit. The how to videos are extremely helpful as well.
John Walsh (verified owner) –
If you’re going back and forth btwn the Theta and Theta Forward trigger like I was, then I would recommend the Forward if you have Med-XL hands; I wear a L or XL in gloves and am really glad I went with the Forward. Looks great, functions great. I put in the spring kit at the same time and highly recommend both. Great products as usual from HBI.