Description
HBI drop in trigger for the CZ Bren 2. Our flat faced trigger for the Bren 2 reduces take-up by over 35% and nearly eliminates over-travel after the sear releases the hammer. We machine our Bren 2 trigger to fit both the lower receiver and the sear/disconnector assembly more precisely than the molded factory trigger. All of the enhanced geometry of our trigger is the result of careful and deliberate design and manufacturing. There are no set screws, no fitting, and no adjustments needed to factory parts. This is a precision part that elevates the performance of the Bren2 fire control group to the next level. Machined from aluminum, black is anodized hardcoat/type3 per MIL-A-8625, colors are anodized type2 per MIL-A-8625. US patent is pending.
- CZ Bren 2 Enhanced Trigger
- Flat Trigger with 35% Reduction in Pre-Travel Take Up
- Nearly Eliminates Over-Travel
- Made in USA, 922R Compliant
- Available in Black, Red, and Tungsten
Designed and Manufactured completely in USA.
Gunsmith Installation Recommended for All Parts.
Frank (verified owner) –
Easy install. Very good video on how to remove and reassemble. Really like an AR trigger install.
Should sell the trigger AND disconnector as a package .
fellintooblivion (verified owner) –
Installing a trigger can be a daunting process if you’ve never done it but the install video they have on this site is very thorough and detailed. Set up your phone or tablet near your work station and follow the video step by step, pausing as you go. Will take you around an hour or so.
This trigger almost completely eliminates the slack/take up/ and creep of the factory Bren 2 trigger. If you’re used to a two stage AR trigger and try to pre-load this, it’s going to go off before you’re ready because the break is incredibly crisp.
Very high quality, no tool marks or rough edges.
The red version is a very metallic red that looks great against the jet black color of the Bren 2.
brownkid (verified owner) –
Great upgrade at an affordable price. Does not alter the trigger pull weight (this is a good thing) which is already in the 4-5 lb range. Eliminates 60-70% of the trigger take-up and 80-90% of the over travel. This mod makes the trigger feel like what you would want in a really nice high end DMR, which is amazing considering this trigger is in a “pistol”. Short of an adjustable precision rifle trigger (which you actually don’t want in a gun like this) I don’t think I’ve felt a better trigger on any other rifle. As a side benefit, this trigger also takes up the minor side to side slop in the factory trigger and the trigger is rock solid (no movement at all) when you engage the safety.
John (verified owner) –
For the money works great. Just get it.
John (verified owner) –
trigger works as advertised. Excellent product
Travis Haessly (verified owner) –
Not only does this trigger look amazing in red but its oh so crisp. This is a high value low cost upgrade.
George Martin (verified owner) –
Bought the trigger the charging handle and the safety selectors. All are top quality and the trigger is fantastic.Very short take up and reset.Almost as good as my STI DVC P
Rab (verified owner) –
Nice trigger. Fit and finish are excellent. Improves on an already good stock trigger pull. Installation was easy due to the instruction video. If you can install a trigger in an AR, you can install this.
Got the red color, really stands out against the black on the rest of the gun.
Sean Barret –
Fast installation. Trigger has no slop, clean break, quick reset. Smooth and crisp, feels like a 4 pound pull, haven’t measured it. Outstanding value for the price.
Nonya (verified owner) –
This is a must. Stock trigger as you know is nice. However, this is definitely fair priced (922r) upgrade with noticeable performance. The feel of the trigger on the finger pad, less creep. Looks great.
Instal is straight forward with instructional video. They advise not to take out the safety gear thingy, to eliminate this step. Mine fell out during instal but was not a major problem If so, fold the spring loaded leg down from behind the bar its held on so your tool is out of the way. Insert gear back in its correct position (teeth portion facing the leg) and lower the leg back. Function check.
Prizrak2084 (verified owner) –
The factory trigger is nice and light but feels a bit loose, “plasticky” and has quite a bit of take-up and over-travel. As advertised, this trigger solves these issues, in addition to looking what I can only describe as “sick”. You end up with something that functions and feels very close to the famous (and pricey) Geissele SSA-E. Awesome upgrade for an awesome gun!
The installation is only slightly trickier than your normal AR and AK trigger and the manufacturer’s video does a great job of walking you through it. I installed this trigger, their extended safeties and the charging handle, taking my time and enjoying the process, in well under an hour. Nothing really gave me a hard time. I can see how it can be more difficult for someone who is not used to installing AR and AK triggers though. Still, the video is very thorough.
A very worthy upgrade for not much dough!
Robert Myers (verified owner) –
Glad I purchased. With the install video, anyone with a tiny bit of mechanical ability can install themselves. Great function upgrade and I love the Tungsten look!
Lindsey Arcangel –
Definitely a must do upgrade over stock trigger. Better fitment, feels good and also having an install video to refer to helps alot
T. Hunter (verified owner) –
Great trigger! Easy Install with the Tutorial Video. Makes a big difference in travel and reset. Great upgrade! The inclusion of the slave pin in the package is a lifesaver for install.
Andrew –
WOW! The Bren 2 factory trigger is good, don’t get me wrong, but the HBI really takes it to another level. It really does make the trigger feel like a Geissele SSA-E. Extremely simple install, thanks to HBI’s tutorial. Another world class product from HBI, great job!
Paul (verified owner) –
Really a great replacement. Excellent and informative video for installation, and it truly does feel considerably different from the factory trigger (not that it’s bad, just different).
njpratt (verified owner) –
Great trigger, easy to install and feels awesome. The stock trigger is really good on the Bren 2, but once again HBI goes above and beyond to provide an upgrade that makes it even better.
2-A Citizen (verified owner) –
Straight drop in. No fitting required. Installed right into a CZ Bren 2. Cut the reset of the trigger down massive. Feels like a very expensive trigger now. Was a simple install and I would suggest it to everyone.
Thanks HBI!
Jeremiaht (verified owner) –
Excellent upgrade over the stock, Love the over travel stop, very well designed!
Doug bierly (verified owner) –
Easy install with video. First trigger I’ve ever installed. Took 20 minutes. Looks sick and with the install you get to see how the lower functions. Fun install. May take it apart and do it again. It was that satisfying. Feels like a different gun at the range. Had my Sig fanboy buddy shoot it. He was wowed.
brightt (verified owner) –
Plastic stock one was not bad, but this one looks way better and functions better! keep up the good work. Would like an even lighter pull weight / shorter reset option
Zachary Mueller (verified owner) –
Warning I haven’t yet installed. Although, I ordered the Black and Red. They both look phenomenal, and the machining is excellent. I have seen and heard a plethora of great things, so I went for it. If your on the edge you should too. You won’t regret it.
Robert Thompson (verified owner) –
I’m giving it 4 stars right now because I haven’t shot it yet Other than dry firing it with the snapcap Other than dry firing with the snapcap. It reduced to take up but there’s not really a wall before it releases the hammer but the fit, finish, and feel were great. And it and the 5 other things I ordered were to my door after 2 days for me placing the order.
ERIC KEGEL (verified owner) –
I’ll start by saying I liked the factory trigger, & didn’t see any reason to change it…until I saw how much pre-travel this trigger kit eliminates. Since I was getting the charging handle & safety levers anyway, I figured “why not”?
I am glad I did! A perfectly fine trigger has been transformed into a superb trigger. There is now just a smidge of pre-travel (which I like), & the geometry of the HB shoe makes it feel even lighter. After about 150 rounds, it can still surprise me when it breaks!
I can also report true mechanical advantages with the charging handle & safety levers. Highly recommended, & I truly appreciate the great installation videos that HB provides.
I have a lot of HB products on my Scorpion, so I can’t say I was surpised by the quality of their products. Instead, I’ll say that they continue to impress, & have earned a lifelong customer. Thank you, HB Industries!
BC-Fort Worth (verified owner) –
I called Mike B about the components to upgrade my CZ Bren rifle. The factory CZ Bren 2 trigger weight is very good and loose. The OEM plastic trigger has quite a bit of take-up and over-travel. As stated by HBI- Mike B, this trigger solves these issues. I ended up with something that functions and feels very close to my Geissele SSE.
The installation is more difficult your normal AR and AK trigger. The HB Industries manufacturer’s video provides a great job of informing the owner through it. I installed the following: this trigger, extended safeties and the charging handle, taking my time and enjoying the process, in well under an hour. The engineering and design of this trigger is excellent.
This trigger is a worthy upgrade for any CZ Bren without the higher cost of a Geissele SSE. This is the best upgrade for the money for the CZ Bren
Mike (verified owner) –
Another great add on this with the offset changing handle are a game changer on the bren 2. Very easy install and the video was great. The slave pin was a great add on made life easy.
Joel Folk (verified owner) –
I would give this six stars if possible. I can’t believe what they did with only the trigger. Would typically need an entire fire control group to get these results. The factory plastic trigger has enough give that it makes finding the wall difficult and the break feel mushy. With this trigger installed the take up is greatly reduced and the wall very discernible. Break is also improved and now has the glass like feel of a precision rifle trigger. Love the flat face and curve at the bottom. Matches the trigger guard bolt release perfectly. Also love how wide the face is. Includes a nice toolbox sticker as well.
Matthew (verified owner) –
It’s a quick and easy upgrade. Makes for a much shorter length of pull. Short reset and over travel.
Nathan A (verified owner) –
It’s amazing! If you have been thinking about it, just send it. You will not regret it!
Changes the whole gun for the better! Totally worth the money no doubt about it.
And feels good, shoots good
Michal R –
Definitely recommended. Easy to install and it’s really improvement from factory trigger, which is quite good.
Ed Klyce (verified owner) –
One of the best upgrades one can make to the Bren 2 – I found it helped lighten the trigger pull slightly and seemed to make it crisper as well. Moreover, it just feels much more solid than the stock CZ trigger and feels fantastic. Easy to install with a minimum of tools. The video is a super helpful guide.
Logan (verified owner) –
A trigger that looks better, makes the gun function better, and is made better for $50… HB is the best of the best
emar@truby.us (verified owner) –
Super easy install, HBI also makes a great video showing you how to install the trigger shoe. A slave pin is also included in the kit. The trigger is a definite must! Makes the trigger pull crisper & reduces the length of reset. Love the feel of this trigger!
Timon Wood (verified owner) –
There’s not much to say, it’s a great trigger upgrade.
Admittedly, the Bren 2 already has a good trigger in the first place, but somehow the HB Industries trigger is even better. It’s a lightweight trigger pull with less take up than the factory trigger. The trigger wall is a bit squishy, but that’s largely a non-issue as someone used to AK platform triggers. The trigger eliminates the overtravel which is always a great thing, and finally, the reset is pretty nice and crisp. All in all, it’s a great trigger upgrade, I recommend it!
A+
Bryan Smith (verified owner) –
I just installed 2 of these on an 8″ and 16″ Bren 2. To be honest I drug my feet for several days on the install because I thought it might be more difficult than it was. I watched the video first. The first trigger took me 15 minutes. The second one took me 5 minutes. The take up was drastically reduced and over travel is basically gone. The wall is slightly more tactile and I dropped roughly a half pound pull weight on both. (Not sure if that’s to be expected.) Apparently the trigger groups vary from CZ because the 8″ went from 3lbs 8oz to 3lbs even. The 16″ went from 3lbs 1oz to 2lbs 8oz. Very nice triggers and we’ll worth the small investment.